Advertisement
Step 3: Seat Post Assembly
A.
Pull on the seat post adjustment knob (M)
to release the locking pin and slide the
seat post (4) down into the seat post tube (L).
B.
When the desired height is reached, release
the seat post adjustment knob (M) to allow
the locking pin to engage.
Note: In order to complete Step 5 and 6,
the seat post needs to be set to the highest
level. Pull the seat post up until the lock pin
clicks in the last hole in the seat post
Step 4: Seat Assembly
A. Place the seat (5) over the seat mount post (N).
B. Align the seat (5) so the front of the seat is
C. S
ecurely tighten the pre-installed nut (12)
on each side of the seat mounting bracket (O)
under the seat (5).
12
4
M
L
5
O
12
N
Advertisement
