LifeSpan C3-DT Owner's Manual page 11

Step 1: Remove Components from Box
B. Locate the hardware bag.
Step 2: Rear Support Assembly
A. P lace the main frame assembly (1) on a solid level surface. It may be necessary to prop the
back of the frame up slightly to give clearance for step B.
B. Align the rear support assembly (3) with the main frame rear bracket (A).
C. I two long M8 bolts (8) and cur ve washers (9), found in the hardware bag,
Do not tighten bolts yet
D. Insert two M8 bolts (10) and curved washers (9) through the top of the main frame
rear bracket (A) and into the rear support assembly (3).
E. Securely tight M8 8
10
1
A
r
10
9
3
9
8
C3-DT
Desktop Cycle
11