8.1.30 Burner; replacing
Switch off the power supply of the heating system on the circuit
breaker.
Set the main switch on the BC10 to "0" (Off).
Remove the casing.
Close the gas shut-off valve (see fig. 73, pos. 1).
Remove the cable plug from the gas control valve
(see fig. 74, pos. 1).
Remove both cable plugs from the fan unit (see fig. 75, pos. 1).
Logamax plus GB142-24/30/45/60 - We reserve the right to make any changes due to technical modifications!
fig. 73
Gas shut-off valve closed (1), gas shut-off valve
open (2)
fig. 74
Replacing the gas control valve
(e.g. HONEYWELL gas control valve)
1
fig. 75
Disconnecting the cable plug from the fan unit
Actions
8
1
113