Mitel SX-50 User Manual page 50

ALARMS
.
_.
0 Use an
to your
Console Reset
extension to report the problem
communications department or maintenance personnel.
When the console is plugged in, the alarm message
CONSOLE RESET
appears briefly in the display, If this ever remains more than a few
seconds,
l
Pull out handset or headset plug
0 Plug it in again
to see if it clears the fault.
If not, the system remains in 'Night Service.
l
Use an extension to report the problem
to your communications department or maintenance personnel.
When the system is first switched on
The console displays
NO COMMUNICATION
,
during a few seconds, after which the time and date are displayed.
Minor Faults
Faults of a minor nature need to be corrected, but generally do not
prevent your continued operation of the system.
When the system detects a minor fault it carries out any corrective
action, and then sends an alarm to the console. The bell rings (except
if you have muted it) and the red lamp above the ALARM key flashes.
You must find out what the alarm is and report the fault.
Attendant Functions
4-7