Rs-232 Parameter Defaults - Motorola LI4278 Product Reference Manual

RS-232 Parameter Defaults

Table 7-1 lists the defaults for RS-232 host parameters. If any option needs to be changed, scan the
appropriate bar code(s) provided in the Parameter Descriptions section beginning on
NOTE See
miscellaneous default parameters.
RS-232 Host Default Table
Table 7-1
RS-232 Host Parameters
RS-232 Host Types
Baud Rate
Parity Type
Stop Bit Select
Data Bits (ASCII Format)
Check Receive Errors
Hardware Handshaking
Software Handshaking
Host Serial Response Time-out
RTS Line State
Beep on <BEL>
Intercharacter Delay
Nixdorf Beep/LED Options
Ignore Unknown Characters
Appendix A, STANDARD DEFAULT PARAMETERS
Parameter
for all user preferences, hosts, symbologies, and
Default
Standard 7-6
9600 7-8
None 7-9
1 Stop Bit 7-9
8-Bit 7-10
Enable 7-10
None 7-12
None 7-14
2 sec 7-15
Low RTS 7-16
Disable 7-16
0 msec 7-17
Normal Operation 7-18
Send Bar Code 7-18
RS-232 INTERFACE
page 7-4.
Page
Number
7 - 3