Hid Ignore Unknown Characters; Emulate Keypad - Motorola LI4278 Product Reference Manual

4 - 10 LI4278 Product Reference Guide

HID Ignore Unknown Characters

This option applies only to the HID Keyboard Emulation device and IBM device. Unknown characters are
characters the host does not recognize. When Send Bar Codes With Unknown Characters is selected, all
bar code data is sent except for unknown characters, and no error beeps sound. When Do Not Send Bar
Codes With Unknown Characters is selected, bar code data is sent up to the first unknown character, then
the linear imager scanner issues an error beep.
*
Send Bar Codes With Unknown Characters
(Enable)

Emulate Keypad

When enabled, all characters are sent as ASCII sequences over the numeric keypad. For example, ASCII A is
sent as "ALT make" 0 6 5 "ALT Break."
*
Disable Keypad Emulation
Do Not Send Bar Codes With Unknown Characters
(Disable)
Enable Keypad Emulation