3 - 8
LI4278 Product Reference Guide
Troubleshooting (Continued)
Table 3-1
Problem
The red illumination does not appear
when the trigger is pulled.
NOTE If after performing these checks the symbol still does not scan, contact the distributor or contact Motorola
Solutions Support. See
Possible Causes
Linear imager scanner is
disabled.
No power to the linear imager
scanner.
Interface/power cables are loose.
page xxiii
for contact information.
Possible Solutions
For Synapse or IBM-468x mode,
enable the linear imager scanner via
the host interface.
Check battery and charging contacts;
ensure that end cap to battery chamber
is secured; ensure all power and cable
connections to cradle are secure.
Check battery and charging contacts;
ensure power and cable connections to
cradle are secure.