Pl 10.10 Exit Assembly - Xerox WorkCentre M20 Service Manual

PL 10.10 Exit Assembly

Item Part Description
1 600N01736 MEC - Exit Assembly (REP 10.2)
2 – PMO - Guide - Exit Upper (P/O PL
10.10 Item 1)
3 – PMO - Guide - Exit Lower (P/O PL
10.10 Item 1)
4 – PMO - Guide - Jam Remove (P/O
PL 10.10 Item 1)
5 007N01115 MEC - Roller Exit Drive
6 022N01474 PMO - Roller Decurl
7 020N00768 PMO - Pulley Duplex
8 023N01051 Belt - Timing Gear
9 007N01261 Gear - Duplex
10 013N00514 PMO - Bearing Large DP
11 – IPR - Ground - Exit (P/O PL 10.10
Item 1)
12 – ICT - Shaft - Exit Lower ID (P/O PL
10.10 Item 1)
13 – PMO - Roller Exit (P/O PL 10.10
Item 1)
14 – Spring - Exit Roll FD (P/O PL 10.10
Item 1)
15 – PMO - Holder Exit Roll (P/O PL
10.10 Item 1)
16 – PMO - Roller FD F (P/O PL 10.10
Item 1)
17 – PMO - Roller FD R (P/O PL 10.10
Item 1)
18 – Spring - Exit Lower Idle (P/O PL
10.10 Item 1)
19 115N00354 MEC - Brush Antistatic
20 – PBA SUB - Bin Full Sensor (P/O PL
10.10 Item 1)
21 – Actuator SUB - Bin Full Sensor (P/
O PL 10.10 Item 1)
22 – E - Clip (REF: PL 31.10 Item 6)
NOTE: If necessary, refer to GP 20 for the acronym list and
cross reference lists of more commonly recognised part
names.
Work Centre M20 Family
March 2004
5-25
Parts List
PL 10.10