Pl 5.12 Dadf Assembly (3 Of 5) - Xerox WorkCentre M20 Service Manual

PL 5.12 DADF Assembly (3 of 5)

Item Part Description
1 – MEA Unit - Cover Exit Assembly (P/
O PL 5.10 Item 31)
2 – Cover M Exit (P/O PL 5.12 Item 1)
3 – Spring ETC - White BAR (P/O PL
5.12 Item 1)
4 – PMO - Roller Idle Scan (P/O PL
5.12 Item 1)
5 – Shaft - Exit Idle (P/O PL 5.12 Item
1)
6 – MEC - Brush Antistatic (P/O PL
5.12 Item 1)
7 – Ground - P - Exit Cover (P/O PL
5.12 Item 1)
8 – Roller - Exit (P/O PL 5.10 Item 31)
9 – Gear (P/O PL 5.10 Item 31)
10 – Label - Cover - Exit (P/O PL 5.12
Item 1)
11 – Guide - M Duplex Lower (P/O PL
5.10 Item 31) (REP 5.1)
12 – Guide - M Duplex Inner (P/O PL
5.10 Item 31) (REP 5.1)
13 – Gear - M Scan Roller (P/O PL 5.10
Item 31)
14 – PMO - Bushing Holder (P/O PL
5.10 Item 31)
15 – Roller - SCAN (P/O PL 5.10 Item
31)
16 – Spring ETC Clutch (P/O PL 5.10
Item 31)
17 – Roller - Duplex (P/O PL 5.10 Item
31)
18 – MEC - Clutch Small (Duplex) (P/O
PL 5.10 Item 31)
19 – Bush - 6 D (P/O PL 5.10 Item 31)
20 – Bush - 10 - D (P/O PL 5.10 Item 31)
21 – MEA Unit Guide Duplex (P/O PL
5.10 Item 31) (REP 5.1)
22 – Bush - 6D (L) (P/O PL 5.10 Item 31)
NOTE: If necessary, refer to GP 20 for the acronym list and
cross reference lists of more commonly recognised part
names.
Parts List
PL 5.12
March 2004
5-12 Work Centre M20 Family