ADTRAN Total Access 3000 DSLAM Installation And Maintenance Practice page 46

Total Access 3000 DSLAM DS3 Primary Switch Module Installation and Maintenance Practice
Table 11. PSM Advanced Provisioning Menu Options (Continued)
Option Description
5 Reserved Voice VPI
6 Cell Buffer, CAC, &
Policing Options
7 Alarms Provisioning
Subscriber Interface Advanced Options
8 Invalid cells to exit Sync
state
9 Valid cells to enter Sync
state
10 Restore Factory Defaults
36
Function
This option is used to set the Reserved Voice Virtual Path
Identifier (Reserved Voice VPI) to a number between 0 and
1000.
This option displays the
Options Menu" on page 37.
This option displays the
page 46.
This option displays the Invalid cells to exit Sync state
value. The value can be set to any number between 1 and
15.
This option sets the number of bad (invalid) cells detected
before the DS3-PSM exits the synchronized state.
This option displays the Valid cells to enter Sync state
value. The value can be edited to any number between 1 and
15.
This option dictates the number of good (valid) cells detected
before the DS3-PSM re-enters the synchronized state.
This option is used to restore the advanced provisioning
options to the factory default values.
"System Buffer, CAC, & Policing
"Alarms Provisioning Menu" on
61181041L3-5A