Table 33. Traffic Descriptor Screen Hot Keys - ADTRAN Total Access 3000 DSLAM Installation And Maintenance Practice

Total Access 3000 DSLAM DS3 Primary Switch Module Installation and Maintenance Practice
Hot Key Description
This hot key is used to display the
C
This hot key is used to duplicate an existing traffic descriptor.
D
This hot key is used to modify an existing traffic descriptor.
M
This hot key is used to display the next page of traffic descriptors.
N
This hot key is used to display the previous page of traffic descriptors.
P
This hot key is used to remove a traffic descriptor.
R
This hot key is used for read-only viewing of an existing traffic descriptor.
S
66

Table 33. Traffic Descriptor Screen Hot Keys

"Create Traffic Descriptor Screen" on page 67.
61181041L3-5A