ADTRAN Total Access 3000 DSLAM Installation And Maintenance Practice page 70

Total Access 3000 DSLAM DS3 Primary Switch Module Installation and Maintenance Practice
Table 30. ATM Provisioning Screen - DS3 Port Menu Options (Continued)
Option Description
4 Scrambler
5 Idle Cell Type
6 Maximum VCCs
7 Maximum VPCs
8 Maximum VPI Bits
9 Maximum VCI Bits
10 Physical Address
11 Neighbor Name
12 Neighbor IP Address
13 PNNI port options
60
Function
This option is used to enable or disable scrambling of the
ATM cell payload.
This option is used to set the Idle Cell Type to one of the
following options:
• BELLCORE (Unassigned Cell)
• ITU (Invalid Cell)
This option is used to set the maximum Virtual Channel
Connections (VCCs) value to a number from 1 to 8192.
The sum of the current VCCs and VPCs for this port cannot
exceed this value.
This option is used to set the maximum Virtual Path
Connections (VPCs) value to a number from 1 to 256.
The sum of the current VCCs and VPCs for this port cannot
exceed this value.
This option is used to set the maximum VPI Bits value to a
number from 0 to 8.
This option is used to set the maximum VCI Bits value to a
number from 5 to 16.
This option is used to set and display the alphanumeric
Physical Address (often the ATM address) of the DS3 port.
This option is used to set and display the remote (far-end)
termination of the interface known as the Neighbor Name.
The Neighbor Name is an alphanumeric value up to 25
characters in length.
If the neighbor system is manageable through SNMP and
supports the object ifName, the value of this field must be
identical with that of ifName for ifEntry of the lowest level
physical interface for this port.
This option is used to set and display the Neighbor IP
Address in the format of xxx.xxx.xxx.xxx
The IP address of the neighbor system connected to the far-
end of this interface, to which a Network Management Sta-
tion can send SNMP messages, as IP datagrams sent to UDP
port 161, in order to access network management informa-
tion concerning the operation of that system.
This option displays the
Slot # Port # (PNNI Port Options) Menu"
with fewer options enabled.
"ATM Provisioning Screen - Shelf #
on page 55, but
61181041L3-5A