Table of Contents
Advertisement
Total Access 3000 DSLAM DS3 Primary Switch Module Installation and Maintenance Practice
CSM Test Menu
The CSM Test menu (see
tests and verify the integrity of the loop. The CSM Test menu is accessed by selecting DS3
Loopback Test from the Test menu. The graphic at the bottom of the screen displays active
loopbacks and changes based upon loopback selections. The Network side is to the left of the
DS3 Line Interface Unit (LIU). The box to the right of the DS3 Framer is representative of the
ATM engine. The Local side is to the right of the ATM engine.
Shelf: 1 Slot: B
The CSM Test menu options are shown in
Option
Description
1
DS3 Loopback
94
Figure
49) is used to access submenus to perform DS3 loopback
Total Access System
CSM Test
1.
DS3 Loopback
Selection:
DS3 LIU
DS3 FRAMER
+----------+
+--------+
|>>>>>>>>>>|>>>>|>>>>>>>>|>>>>|>>>>>>>>>>|
|
|
|
|<<<<<<<<<<|<<<<|<<<<<<<<|<<<<|<<<<<<<<<<|
+----------+
+--------+
'?' - System Help Screen
Figure 49. CSM Test Menu
Table
Table 56. CSM Test Menu Options
Function
This option displays the
ONLINE
: No Loopback
(ATM)
+----------+
|
|
|
+----------+
56.
"DS3 Loopbacks Menu"
MM/DD/YY HH:MM
on page 95.
61181041L3-5A
Advertisement
Table of Contents
