DS3 CSM Status Screen
The DS3 CSM Status screen (see
Shelf: 1 Slot: B
The DS3 CSM Status screen fields are shown in
Field
Framing
Line Length (meters)
Bank Timing
Active Loops
APS Status
61181041L3-5A
Figure
43) displays DS3-PSM status information.
Total Access System
DS3 CSM Status
Framing
Line Length(meters) : 15
Bank Timing
Active Loops
APS Status
Service State
Tx Line Status
Rx Line Status
Line Code
DS3 Cell Delineation: TRUE
Far End Alarm
Figure 43. DS3 CSM Status Screen
Table 47. DS3 CSM Status Screen Fields
Description
This field displays the current DS3 Framing setting.
This field displays the current DS3 provisioned line length setting.
This field displays the bank timing (set in the Primary Timing
parameter).
This field displays the active loop timing.
This field displays the current Automatic Protection Switching (APS)
status as one of the following:
• Online/Allow: This setting indicates that the unit is online and
allowed to switch to the standby unit upon detection of a fault
condition.
• Online/Inhibit: This setting indicates that the unit is online but
is inhibited from switching to the standby unit upon detection
of fault condition.
: C-BIT DIRECT MAP
: Primary (Ds3 Loop)
: NONE
: ONLINE/ALLOW
: IS
: NORMAL
: NORMAL
: B3ZS
: No Alarm
Table
47.
Menu Trees
MM/DD/YY HH:MM
ONLINE
85