Total Access 3000 DSLAM DS3 Primary Switch Module Installation and Maintenance Practice
Table 35. VC/VP Provisioning Screen Fields (Continued)
Field
Description
VPI
This field displays the current VPI value of the VC/VP Endpoint 2.
VCI
This field displays the current VCI value of the VC/VP Endpoint 2.
The VC/VP Provisioning screen hot keys are shown in
Hot Key
Description
This hot key is used to create a new
C
ing - Create PVC/PVP Menu"
This hot key is used to disable one PVC at a time. Typing
D
Index of VC/VP To Disable prompt.
This hot key is used to enable one PVC at a time. Typing
E
Index of VC/VP To Enable prompt. A PVC will not pass data unless it has been
enabled from this menu.
Enter the Index number for a corresponding PVC to display the
E
I
NTER
NDEX
Information Screen"
This hot key is used to display a specific PVC page of the Created VC/VP List.
G
This hot key is used to display the Enter Index of VC/VP To Toggle Cell Loopback
L
field.
This hot key is used to display more hot keys at the bottom of the menu.
M
This hot key is used to display the next page of PVCs in the Created VC/VP List.
N
This hot key is used to display the previous page of PVCs in the Created VC/VP
P
List.
This hot key is used to remove a PVC. Typing
R
To Remove prompt.
This hot key is used to display the
S
to search existing PVCs by traffic descriptor or assigned port.
This hot key is used to display the names and status of each PVC in the Created
V
VC/VP List.
70
Table 36. VC/VP Provisioning Screen Hot Keys
on page 71, which displays the details of that PVC.
Table
33.
PVC
. Typing
displays the
C
on page 73.
displays the Enter Index of VC/VP
R
"Search Through VC/VP List Menu"
"VC/VP Provision-
displays the Enter
D
displays the Enter
E
"Detailed PVC
on page 77
61181041L3-5A