Total Access 3000 DSLAM DS3 Primary Switch Module Installation and Maintenance Practice
Table 34. Create Traffic Descriptor Screen Options
Option
Description
1
Name
2
Service Category
3
Type
4
PCR (0+1)
5
Frame Discard
6
Create
Note: Options 4-6 are enabled depending on the Service Category and Type options.
68
Function
This option is used to name the new traffic descriptor using
up to ten alphanumeric characters.
This option is used to select a service category. Options are
as follows:
• CBR (Constant Bit Rate)
• rtVBR (real time Variable Bit Rate)
• nrtVBR (non-real time Variable Bit Rate)
• UBR (Unspecified Bit Rate)
This option is used to select one of the following standard
traffic descriptor types:
• No Policing
• atmNoClpNoScr
• atmClpNoTagNoScr
• atmClpTagNoScr
• atmNoClpTagNoScr
• atmNoClpNoScrCdvt
This option is used to set the Peak Cell Rate (PCR) value to a
number from 0 to 1500000.
This option is used to enable or disable Frame Discard.
This option is used to create a new traffic descriptor with the
parameters from the options above. This menu item must
be selected to complete the creation of each traffic
descriptor.
61181041L3-5A