Unconfigured Phones; Upload Phone Configure; Date && Time - ATCOM IPPBX IP4G User Manual

IPPBX IP4G User Manual
NOTE: If the firmware version is different from the one you're going to load in IP phone, it will cause
problems in IP phone.
Line
You can configure the line key settings for this IP phone.

10.2.3 Unconfigured Phones

In this section, IPPBX will scan all the supported IP phones and display here, you can click the 'Edit' button
of IP phone and input the corresponding information in the pop-up window.

10.2.4 Upload Phone Configure

Click "Upload a file" and choose the configure file of IP phone in the popup window.
NOTE: the file format must be .xml.
10.3 Date && Time
Set the date and time for IPPBX. The settings will take effect immediately.
1) General
There are two ways to set Date/Time for IPPBX:
a. NTP server
Make sure the connection between IPPBX and NTP server is OK, if the NTP server is located on Internet, the
gateway of WAN should be right set so that IPPBX can access Internet.
GMT TimeZone is also an important arguments for time setting in this way. Please choose the right Time
Zone.
b. Manually
~ 59 ~
ATCOM TECHNOLOGY CO., LIMITED