ATCOM IPPBX IP4G User Manual page 36

Sip-based ip voice switch ippbx
Hide thumbs Also See for IPPBX IP4G:
Table of Contents

Advertisement

IPPBX IP4G User Manual
Define the Caller ID number to be matched on incoming calls. Leave this field blank to match any or no CID info.
Special characters described in chapter 5.2 can be used here as same.
DID number
Just leave it blank.
Extension
It's unavailable for Analog / GSM trunk, leave it blank.
2) Inbound Trunk Selection
Select the trunks for which this inbound route apply.
3) Time
Select appropriate time intervals for when this inbound route apply.
4) Path
Set the destination for incoming calls.
5) Fax Detection
Configure if detecting faxes in this inbound route.
NOTE: Please choose IVR as the destination above before configure fax detection (recommended)
Destination
Configure where the faxes will be routed when faxes are detected.
No detect
Do not detect faxs
Faxs
Send faxes to an extension. If Choosing a VoIP extension, the fax will be sent to the extension's voicemail as an
attachment.
NOTE: If you receive faxes with custom Email address, the "SMTP settings" should be configured successfully in
advance. If you receive faxes with E-mail address configured in VOIP extension voicemail, you should first make
sure the tested email to your email address works fine.
~ 35 ~
ATCOM TECHNOLOGY CO., LIMITED

Advertisement

Table of Contents
loading

Table of Contents