ATCOM IPPBX IP4G User Manual page 20

IPPBX IP4G User Manual
The password for above Email Address/Account.
SMTP Server
SMTP server that above email address/account is located in.
Port
Port for SMTP server, for example: Gmail server use port 465 to send / receive email.
Use SSL/TLS to send secure message to server
Some servers need to authenticate sender before sending email, then the box should be checked.
Test SMTP Settings
Check whether the SMTP setup is OK. PBX will send an email to the test email address using above SMTP
setting information. If the test failed, please check that information and network connection.
NOTE: After SMTP setting, please set Email address for each extension to achieve Voicemail to Email function.
2) Voice Mail Setting
Max Messages
This limits the number of messages in a voicemail folder. The maximum value is 9999 (hard coded) and the
default 100. When a mailbox has more than this number of messages in it, new messages can not be recorded
and "voice mail box is full" is played to the caller.
Max Messages Time
This defines the maximum amount of time in seconds of an incoming message. Use this when there are many
users and disk space is limited. The default value is 120 (2 minutes), 0 means there will be no maximum time limit
enforced.
Min Messages Time
This setting can be used to eliminate messages which are shorter than a given amount of time in seconds. The
default value for this setting is 5.
Say CID/Duration
Read back caller's telephone number / message duration prior to playing the incoming message when checking
it.
~ 19 ~
ATCOM TECHNOLOGY CO., LIMITED