Test An Embedded Screen With External Power Supply - Star Trac E-TRe Troubleshooting Manual

Troubleshooting

Test An Embedded Screen with External Power Supply

E-TRe & E-TRxe
When troubleshooting an embedded touch screen that won't power up, using an external 12 VDC power supply is the fastest
way to determine if the screen is working. The following procedure explains how to use the external power supply.
Note: This document is used as part of the "Embedded Touch Screen Won't Power Up" flowchart.
Use an External Power Supply
Use a separate 12 volt DC power supply (Fig. 1) and an adaptor cable (Fig. 2). The power supply from an E Series bike
embedded touch screen or PVS kit would work. The adaptor cable can be obtained from Star Trac.
Fig. 1
Fig. 2
STAR TRAC FITNESS 1 of 2 637-1380 Rev: A