Ref Nr: 9A (Applies To All Treadmill Models With Belleville Washer Tensioning System) - Star Trac Treadmills Housekeeping & Maintenance

Ref Nr: 9A (
Applies to All Treadmill Models With Belleville Washer Tensioning System
TENSION – RUNNING BELT
Recommended:
Mandatory:
Average Time:
TOOLS
• #2 Phillips screwdriver (to remove shroud)
• ¼" Allen wrench
• Caliper or ruler with 1/32" graduation or ruler with 1 mm graduation
No Compression
Range during operation: do not touch if Stack is within these dimensions
Prentive Maintenance - Treadmills
Monthly
Bi-Annually (Every 6 months)
2 minutes for inspection
10 minutes, if belt has to be tensioned
Correct Stack Height:
Measured from Base to the last Belleville Washer
Range when adjusting:
Inch Dimensions: 7/8" (+ 0"; - 1/32") (.875 to .843")
Metric Dimensions:
Inch Dimensions: 7/8" (+ / - 1/32") (.875 to .900")
Metric Dimensions:
Correct Compression
(measured from the base to
the last Belleville washer)
22 mm (+ 0 mm; - 1 mm)
22 mm (+ / - 1 mm)
19
)
Doc: 635-4075 Rev: A