Cwdm Sfp; New Software Features In Cisco Ios Xe Release 3.10.2S - Cisco ASR 900 Series Release Notes

Chapter
•
•
•
•
•
For information on how to install the serial interface module, see the
Installation
For information on how to configure the serial interface module, see
on the Cisco ASR 903 Router.
We recommend the installation of the Metro IP Services and Metro Aggregation Services licenses with
Note
serial interface module. For more information about obtaining and installing licenses, see
Licensing

CWDM SFP

Cisco IOS XE Release 3.10S introduces support for the following SFPs on the 10 Gigabit Ethernet XFP
Interface Module:
•
•
•
•
•
•
•
•
•
For more information about how to configure these SFPs, see:
http://www.cisco.com/en/US/partner/docs/interfaces_modules/transceiver_modules/installation/note/O
L_24246.html
http://www.cisco.com/en/US/partner/products/hw/modules/ps5455/tsd_products_support_series_home
.html

New Software Features in Cisco IOS XE Release 3.10.2S

There are no new software features introduced for Cisco IOS XE Release 3.10.2.S.
OL-26630-12
EEE 1613 2009—IEEE Standard for Environmental and Testing Requirements for Communications
Networking Devices in Electric Power Substations
EC 61850-3—IEC standard specifying general requirements for substation automation systems
(SAS) communications and related system requirements.
EC 60870-2-1:1995—IEC standard for substation environmental conditions
EC 60870-2-2:1996—IEC standard for substation environmental conditions
EC 61000-6-5:2001—IEC standard defining immunity for power station and substation
environments
Guide.
Overview.
ONS-XC-10G-EP
ONS-XC-10G-1470
ONS-XC-10G-1490
ONS-XC-10G-1510
ONS-XC-10G-1530
ONS-XC-10G-1550
ONS-XC-10G-1570
ONS-XC-10G-1590
ONS-XC-10G-1610
New Software Features in Cisco IOS XE Release 3.10.2S
Configuring Raw Socket Transport
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
Cisco ASR 903 Hardware
Software
3