Cisco ASR 900 Series Release Notes page 277

Asr 900 series
Hide thumbs Also See for ASR 900 Series:
Table of Contents

Advertisement

Chapter
CSCud55695
Symptom: When you apply a QoS policy with a port level class-default configuration containing a
shaper value to a serial interface, the router applies the shaper value to the channel-level PIR for all
serial interfaces on the IM.
Conditions: This issue is observed when you apply a QoS policy with a port level class-default
configuration containing a shaper value to a serial interface.
Workaround: Add a dummy class-default level at the top of the policy and apply the shaper as a
child policy.
CSCud55799
Symptom: Multiple priority commands are accepted per policy.
Conditions: This issue is observed when you have a policy map with priority configured in one of
its classes. Add another class with policer first and with priority.
Workaround: There is no work around.
CSCud56364
Symptom: Convergence time for POS links for RSP SSO is about four to seven seconds.
Conditions: This issue is observed when all four POS links are created on OC-3 IM. This issue is
not observed on port 0 of OC-3 IM.
Workaround: There is no work around.
CSCud61551
Symptom: The serial number of the RSP in slot 1 is sometimes not displayed in the show inventory
command output.
Conditions: This issue is sometimes observed in the show inventory command output.
Workaround: Reload the router.
CSCud64129
Symptom: The router displays command options to configure control-plane policing, which is not
supported.
Router(config)# control-plane
Router(config-cp)# service-policy ?
input Assign policy-map to the input of an interface
output Assign policy-map to the output of an interface
Conditions: This issue is observed when you attempt to configure control plane policing to restrict
traffic by the CPU.
Workaround: There is no workaround. This feature is not supported.
CSCud71286
Symptom: Configuration synchronization failure is noticed on the interfaces.
Conditions: This issue is observed when you disable autonegotiation and configure the interface
speed as 100 or 1000.
Workaround: There is no workaround. There is no impact on functionality.
OL-26630-12
Caveats in Cisco IOS XE 3.10S Releases
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Asr 903

Table of Contents