Cwdm Sfp; New Software Features In Cisco Ios Xe Release 3.10.1S; New Software Features In Cisco Ios Xe Release 3.10S - Cisco ASR 903 Release Notes

Chapter
•
For information on how to install the serial interface module, see the
Installation
For information on how to configure the serial interface module, see
on the Cisco ASR 903 Router.
Note We recommend the installation of the Metro IP Services and Metro Aggregation Services licenses with
serial interface module. For more information about obtaining and installing licenses, see
Licensing

CWDM SFP

Cisco IOS XE Release 3.10S introduces support for the following SFPs on the 10 Gigabit Ethernet XFP
Interface Module:
•
•
•
•
•
•
•
•
•
For more information about how to configure these SFPs, see:
http://www.cisco.com/en/US/partner/docs/interfaces_modules/transceiver_modules/installation/note/O
L_24246.html
http://www.cisco.com/en/US/partner/products/hw/modules/ps5455/tsd_products_support_series_home
.html

New Software Features in Cisco IOS XE Release 3.10.1S

There are no new software features introduced for Cisco IOS XE Release 3.10.1.S.

New Software Features in Cisco IOS XE Release 3.10S

The following features are introduced in Cisco IOS Release 3.10S.
•
•
OL-26630-08
EC 61000-6-5:2001—IEC standard defining immunity for power station and substation
environments
Guide.
Overview.
ONS-XC-10G-EP
ONS-XC-10G-1470
ONS-XC-10G-1490
ONS-XC-10G-1510
ONS-XC-10G-1530
ONS-XC-10G-1550
ONS-XC-10G-1570
ONS-XC-10G-1590
ONS-XC-10G-1610
Access Circuit Redundancy, page 6-4
Access Switch Device Manager Template, page 6-4
New Software Features in Cisco IOS XE Release 3.10.1S
Configuring Raw Socket Transport
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
Cisco ASR 903 Hardware
Software
3