Cisco ASR 900 Series Release Notes page 259

Asr 900 series
Hide thumbs Also See for ASR 900 Series:
Table of Contents

Advertisement

Chapter
CSCui41169
Symptom: Active card reloads when standby comes active after switchover with scaled
configuration
Conditions: This issue occurs when 4000K EVCs with 1-level ingress policy, and 2-level egress
policy is configured on the router. Ingress policy should have 1-level policer, egress policy should
have one parent and child policer. The issue occurs after a reload of the card with this configuration.
Workaround: There is no workaround.
CSCui44409
Symptom: No console message are seen on insertion or removal of USB
Conditions: This issue is observed standby RSP.
Workaround: More Info:
CSCui45075
Symptom: When an IM is removed from the router, the MST states are not reflected in the standby
RSP. If a switchover happens at this state, it could cause total traffic drop.
Conditions: This issue is seen when HA is configured on the router.
Workaround: There is no workaround.
CSCui98883
Symptom: System crashes on configuring TOD.
Conditions: This issue occurs on dual RSP setup and PTP is configured.
Workaround: There is no workaround.
CSCui99309
Symptom: IPv6 BFD with static client does not display when VRF is configured.
Conditions: This issue occurs when VRF is configured on the router.
Workaround: There is no workaround.
CSCuj30644
Symptom: Multicast does not function in scaled mode and when BDI is configured on the core.
Conditions: This issue was seen in the scaled mode.
Workaround: Execute the no ip igmp snooping command on the router to forward the multicast
traffic.
CSCuj34652
Symptom: IPv6 traffic drops for the packets with next header options. Next header options include
Hop-by-hop options, fragment header.
Conditions: This issue occurs when option packets are punted to CPU and generates the time
exceeded message.
Workaround: There is no workaround.
CSCuj38988, CSCum45935
Symptom: QL does not move to QL-FAILED state when the Gigabit ethernet interface is shutdown.
Conditions: This issue occurs when the Gigabit ethernet interface is shutdown.
Workaround: There is no workaround.
CSCuj42208
OL-26630-12
Caveats in Cisco IOS XE 3.10S Releases
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Asr 903

Table of Contents