Cisco ASR 900 Series Release Notes page 252

Caveats in Cisco IOS XE 3.9S Releases
Workaround: Flap the backup path interface
CSCue43250
•
Symptoms: IMA config won't be parsed correctly after router reload when the A903-IM40S is
inserted in Bay4/Bay5 of the ASR903 router
Conditions: when the IMA and ATM interfaces are adjacent. happens only for IM inserted on Bay
4 or above.
Workaround: insert the IM in bay 0 bay 3 if you want the IMA and ATM parsing to work. or
reconfigure the ATM and IMA interfaces, it would work.
• CSCue45306
Symptoms: CEM circuits configured over TDM IM go down after SSO.
Conditions: on SSO, CEM circuits configured over TDM IM are down.
Workaround: Router reload.
CSCue45498
•
Symptoms: CPU goes high when sending traffic with varying source mac addresses for multiple
streams for BD.
Conditions: port-channel is configured as efp for the BD and mac-limit is configured to 0 for that
BD.
Workaround: N/A
CSCue47317
•
Symptoms: Builds and ISSU may get impacted due to sync damage in latest throttles with respect
to CCO data.
Conditions: Modification in implementation of TDL structures.
Workaround: Sync with CCO data will be committed shortly.
CSCue52774
•
Symptoms: observed with A900-IMA4OS IM in ASR903 box. only when the port above 0 is used
for clock-source, the clocking is not received by the system correctly.
Conditions: when the port above 0 is used for the clock source. issue is seen due to wrong
conversion.
Workaround: 1. use port 0 for clock-sync 2. or insert the SFP in the odd port(protect ones) adjacent
to actual port and using a optical splitter, the cable can be fed to this odd port which can recover the
proper clocking for the given port.
CSCue52968
•
Symptoms: Ping fails and traffic stops through Multilink bundle when CHAP authentication is
enabled
Conditions: This is seen when PFC and ACFC is configured.
Workaround: None, in case PFC and ACFC is configured.
• CSCue57670
Symptoms: After SSO without any network-clock config new Active RSP Sync LED reflects
Holdover state.
Conditions:
Workaround: Reload This is a cosmetic issue.
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
56
OL-26630-12