Cisco ASR 900 Series Release Notes page 265

Asr 900 series
Hide thumbs Also See for ASR 900 Series:
Table of Contents

Advertisement

Chapter
CSCui74718
Symptom: "%EVENTLIB-3-RUNHOG" tracebacks reported on the console.
Conditions: This issue occurs on the router in ptp slave mode. The clock is in phase aligned state
and the ptp configurations are removed using the no ptp clock ordinary domain command.
Workaround: There is no workaround. There is no functional impact.
CSCui92961
Symptom: 100% traffic loss is observed on few pseudowires.
Conditions: This issue occurs when the router experiences couple of link flaps.
Workaround: Issue shutdown command followed by no shutdown command on the EFP; this can
be tedious if impacted pseudowire count is more.
CSCuj04299
Symptom: FMAN FP core traceback observed on the router.
Conditions: This issue occurs after adding several new EFPs or BDIs to running configuration and
updating the QoS configuration on the physical interface
Workaround: There is no workaround.
CSCuj09392
Symptom: Dynamically modifying the user-defined to class-default triggers error.
Conditions: This issue was seen when modifying the user-defined to class-default.
Workaround: There is no workaround.
CSCuj32391
Symptom: Dynamic modify of parent with class default policer to child policer does not take effect.
Conditions: This issue occurs on dynamic modify DM of parent having class-default policer value
greater than child policer value.
Workaround: Reattach the policy-map
CSCuj38988
Symptom: Queue-limit does not go to queue-limit failed state when we the gigabit ethernet interface
is shutdown.
Conditions: This issue occurs while shutting down he gigabit ethernet interface.
Workaround: There is no workaround.
CSCuj51830
Symptom: Traffic drops if policy is attached on port-channel interface.
Conditions: This issue occurs when the policy is attached on port-channel interface
Workaround: Use port-channel IDs less than 10.
CSCuj56164
Symptom: TCAM utilization shows incorrect current usage percentage.
Conditions: This issue occurs when EQoS application is enabled.
Workaround: There is no workaround.
CSCun70703
Symptom: Interface module goes to out of service during ISSU and when FPGA is changed.
OL-26630-12
Caveats in Cisco IOS XE 3.10S Releases
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Asr 903

Table of Contents