Updating The Base Station Firmware - Siemens Gigaset A580IP Manual

Setting the base station via the handset
Entering a local area code
¢
§Menu§
Area Code Select and press
~
a
Entering extra codes
¢
§Menu§
Extra Codes Select and press
q
X
~
Repeat the above steps until you have entered all the extra codes for your area. A
maximum of 5 extra codes can be stored.
a

Updating the base station firmware

If necessary, you can update your base station firmware.
The firmware update is downloaded directly from the Internet by default.
The relevant Web page is preconfigured in your phone.
Prerequisite:
The base station is in idle status, i.e.:
u
No calls are being made via the fixed line network or VoIP.
u
There is no internal connection between registered handsets or to GHC devices.
u
No other handset has opened the base station menu.
88
¢ ¢
Settings Base
§OK§
Enter a local area code (permitted characters (maximum 3) are "*", "#")
§OK§
and press .
Press and hold (idle status).
¢ ¢
Settings Base
§OK§
Select entry ("–––" = blank entry).
If necessary, delete an existing extra code.
Enter an extra code (permitted characters (maximum 3) are "*", "#") and
§OK§
press .
Press and hold (idle status).
Telephony
.
Telephony
.