Siemens Gigaset A580IP Manual page 134

¤
In the Messenger Account field, select whether you wish to use the Gigaset.net
Jabber server or another provider's message server (Other).
The access data for Gigaset.net is already stored in the base station. It is dis-
played in Jabber ID, Authentication password and Jabber server. With this
data you can also register with the Gigaset.net Jabber server through your PC.
¤
Enter the user ID (maximum 50 characters) and password (maximum
20 characters) that you used to register with the message server in the Jabber
ID and Authentication password fields. If you have selected = Messenger
Account Gigaset.net, the fields are preset with your Gigaset.net account.
¤
In the Jabber server field, enter the IP address or the DNS name of the message
server with which you are registered for instant messaging.
Max. 74 alphanumeric characters.
If you have selected Messenger Account = Gigaset.net, the field is preconfig-
ured with the name of the Gigaset.net server.
¤
Enter the number of the communication port on the Jabber server in the Jabber
server port field. The default port is 5222.
If you have selected Messenger Account = Gigaset.net, the port number is pre-
configured.
¤
Enter a resource name (maximum 20 characters) in the Resource field.
The default is phone.
¤
Enter the priority for your phone in the Priority field. Select a number between
-128 (highest priority) and 127 (lowest priority) for the priority.
The default is: 5
¤
Select Set.
Setting up a Gigaset.net Jabber account
Your phone is already registered with the Gigaset.net Jabber server. An account has
been assigned to your phone.
To chat with other Gigaset.net subscribers via this account, you must transfer the
required Gigaset.net subscribers to a Contact list (Buddy list) on your PC. You can
use any conventional Jabber client for this (e.g. PSI, Miranda; see e.g. http://
www.swissjabber.ch).
Do the following to use your Gigaset.net Jabber account:
¤
Start the Web configurator, open the Settings
Web page and select the Messenger Account Gigaset.net field. Your account
data is displayed in Jabber ID and Authentication password. You will need
these to create a Buddy list via the Jabber client on the PC.
¤
Start your Jabber client on the PC.
¤
Enter your Gigaset.net Jabber ID on the Jabber client as a new account. The Jab-
ber ID consists of your Gigaset.net number and "@jabber.gigaset.net"
Example: 12345678901#9@jabber.gigaset.net
¤
Then enter your Authentication password.
Setting the phone with the PC
¢ ¢
Messaging Messenger
133