Siemens Gigaset A580IP Manual page 90

Starting the firmware update manually
¢
§Menu§
Settings
Firmware Update
Select and press
~
Enter the system PIN and press
The base station is connected to the Internet.
§Yes§
Press the Display key to start the firmware update.
Please note
u
The firmware update can last up to 3 minutes.
u
When updating from the Internet, checks are made to ensure that no newer
version of the firmware exists. If this is not the case, the operation is terminated
and a message is issued to that effect.
Automatic firmware update
Your phone will check daily whether a more recent firmware version is available on
the Gigaset configuration server on the Internet. If this is the case, the message
New firmware available is displayed when the handset is in idle status, and the
Message key f flashes.
f
Press the Message key.
§Yes§
Press the Display key to confirm the prompt.
The firmware will be loaded onto your phone.
If you respond to the prompt with
phone will then remind you again about the firmware update at a later date (New
firmware available is displayed again). However, you can also carry out a firmware
update manually (
Please note
If the telephone is not connected to the Internet at the time when the check for
new firmware is to be carried out (e.g. because the router is deactivated), the check
is carried out as soon as the phone is reconnected to the Internet.
ú You can deactivate the automatic version check via the Web configurator
£
( Page 140).
¢
Base
§OK§
.
§No§
, the handset changes to idle status. Your
£
Page 89).
Setting the base station via the handset
§OK§
.
89