Siemens Gigaset A580IP Manual page 23

First steps
New firmware available appears in the display.
New/improved firmware is available for your phone on the Internet. First perform
an automatic update of the firmware (
completed (after approx. 3 minutes) the handset's idle display appears again and
the Message key f flashes. If you press f, the display shown in the picture
above appears and you can start the connection wizard.
Please note
To protect your phone and its system settings from unauthorized access, please
define a 4-digit number code (system PIN) known only to yourself. This code must
be entered before you can register/de-register handsets or alter your phone's VoIP
or LAN settings.
The default system PIN is 0000 (4 x zero). For further information, see
System PIN:
[ _ _ _ _ ]
Ç
Please note
u
You can also call up the connection wizard at any time via the menu
£
( Page
u
The connection wizard will also start automatically if you try to establish a con-
nection via the Internet before you have made the necessary settings. Prereq-
uisite: You have not activated the fixed line network connection as a replace-
ment connection (
Downloading VoIP provider data
No
22
OK
90).
£
Page
Select VoIP
provider?
Yes
£
Page 89). Once the update has been
The active line is marked [----].
¤
Enter your phone's current system PIN
using the keypad.
¤
Press the key below
screen.
The connection wizard is launched.
121):
¤
Press the key below
screen.
Page 85.
§OK§
on the display
§Yes§
on the display