Siemens Gigaset A580IP Manual page 116

Saving settings on the phone
¤
Select Set to save the changes.
The Connections list will be shown after saving (
To discard the changes:
¤
Select the Cancel button.
If all fields are to be reset to the default settings:
¤
Select the Delete button.
Fields without default settings are empty.
Please note
If you do not make any entries for a longer period, the connection to the Web con-
figurator is automatically terminated. Unsaved entries are lost. If necessary, save
intermittently. You can subsequently continue the entry and make changes if nec-
essary.
Activating a new connection
If you have configured a new VoIP connection, you must also activate it.
In the Connections list:
¤
Activate the relevant option in the Active column (
Your phone will register itself with the VoIP provider using the relevant access data.
Refresh the Web page (e.g. by pressing F5).
The Status Registered column will appear if registration was successful. You can
now be reached on this VoIP phone number.
Please note
Once the new entry has been made, the VoIP phone number is assigned to each
handset as a receive number. For adjusting the assignment,
Configuring the fixed line connection
You can assign a name to your fixed line connection. This name is used to display
the connection on the handset and the Web configurator interface, e.g. during allo-
cation of send and receive numbers (
¤
Open the following Web page: Settings
¤
Select the Edit button in the Fixed Line Connection area.
¤
Enter your fixed line network number or the name of your choice
(maximum 16 characters) for your fixed line connection in the Connection
Name or Number field. The default is "Fixed Line".
Setting the phone with the PC
£
Figure 3
£
Page 122), for the call display (
¢
Telephony
on Page 107).
= activated).
£
Page 122.
£
Page
¢
Connections.
42).
115