Setting The Alarm Clock; Activating/Deactivating The Alarm Clock; Changing The Wake-Up Time; When The Alarm Clock Rings - Siemens Gigaset A580IP Manual

Setting the alarm clock

Setting the alarm clock
Prerequisite: The date and time have already been set (

Activating/deactivating the alarm clock

¢
§Menu§
Activation Select and press
After you activate the alarm clock, the menu for setting the wake-up time opens
automatically.
~
a
If the alarm clock is set, the wake-up time appears with the ¼ icon in the display
instead of the date.

Changing the wake-up time

¢
§Menu§
~
a

When the alarm clock rings...

A wake-up call with the selected ringer melody is signaled on the handset
£
( Page
pressed, the wake-up call is repeated twice at five minute intervals and then turned
off for 24 hours.
During a call, the wake-up call is only signaled by a short tone.
Alarm repeated after 5 minutes (snooze mode)
§Snooze§
If you press
Turning off the alarm clock for 24 hours
§Off§
70
Alarm Clock
§OK§
Enter the wake-up time in 4 digits (hours and minutes) and press
Press and hold (idle status).
¢
Alarm Clock Wake up time
Enter the 4-digit wake-up time (in hours and minutes) and then press
§OK§
.
Press and hold (idle status).
83). The wake-up call lasts for a maximum of 5 minutes. If no key is
Press the Display key or any other key (apart from the left Display key).
§Snooze§
three times, the alarm clock switches off for 24 hours.
Press the Display key.
(‰ = on).
£
Page 14).
§OK§
.