Starting A Firmware Update - Siemens Gigaset A580IP Manual

Area VoIP Status
¤
Select Yes after Show VoIP status on handset to activate the status message dis-
play.
If you select No, no VoIP status messages are displayed.
¤
Select Set to save the changes.
Please note
This user guide contains a table with possible status codes and their definitions,
£
Page

Starting a firmware update

If necessary, you can load updates of the base station firmware onto your phone.
The server on which Gigaset Communications makes new firmware versions avail-
able for your base station is set by default. The URL of the Internet server is dis-
played in the Data server field.
Only change this URL when requested by Customer Care. This address is also used
to load provider information from the Internet. Make sure you write down the
default URL exactly before changing it. Otherwise, you will only be able to reacti-
vate the default URL by resetting the base station back to the default settings
£
( Page
Please note
u
When updating from the Internet, checks are made to ensure that no newer
version of the firmware exists. If this is not the case, the operation is terminated.
u
The firmware is only loaded from the Internet if you have not entered a local file
in the User defined firmware file field prior to the update.
Prerequisites:
u
No calls are being made via the fixed line network or VoIP.
u
There is no internal connection between registered handsets or to GHC devices.
u
The base station menu is not open in any of the handsets.
¤
Open the following Web page: Settings
¤
Select the Update Firmware button.
The firmware is updated. This process can take up to three minutes.
Please note
You can also start the firmware update on the handset (
147.
86).
Setting the phone with the PC
¢
Miscellaneous.
£
Page 88).
139