Remote Control Screen; Figure 3-46 Spot Monitor Screen; Figure 3-47 Remote Control Setup Screen - Honeywell HRXD9 User Manual

Configuration
10. You can define which cameras display sequentially on the Spot Monitors.
11. You can save your Display settings by highlighting Save and pressing

Remote Control Screen

1.
2.
3.
Document 900.0856 Rev 3.00
11/07
Figure 3-46
Highlight the box in the Channels column for the desired Spot Monitor and press
.
Selecting Cancel exits the screen without saving the changes.
Highlight Remote Control in the Devices menu and press
Control setup screen
settings for a remote keyboard.
Figure 3-47
Highlight the box beside Port and select from None, RS232 and RS485. If the
RS232 port and RS485 port are in use for PTZ control, networking or text input,
the remote keyboard cannot be configured.
Highlight Setup... and select the correct Baud Rate, Parity, Data Bits and Stop
Bits for the device you are connecting to the DVR.
Spot Monitor Screen
(Figure 3-47) allows you to select a port and make correct
Remote Control Setup Screen
.
. The Remote
69