Table of Contents
Advertisement
WARNING:
power supply blank to cool before touching it.
Insert the power supply into the power supply bay until it clicks into place.
3.
Connect the power cord to the power supply.
4.
Route the power cord. Use best practices when routing power cords and other cables. A cable
5.
management arm is available to help with routing. To obtain a cable management arm, contact an HP
authorized reseller.
Connect the power cord to the AC power source.
6.
Be sure that the power supply LED is green.
7.
FlexibleLOM option
WARNING:
remove the power cord to remove power from the server. The front panel Power On/Standby
button does not completely shut off system power. Portions of the power supply and some internal
circuitry remain active until AC power is removed.
To reduce the risk of personal injury from hot surfaces, allow the power supply or
To reduce the risk of personal injury, electric shock, or damage to the equipment,
Hardware options installation 69
Advertisement
Table of Contents
