Remove The Primary Pcie Riser Cage - HP ProLiant DL385p Gen8 User Manual

If a full-length expansion board is installed in slot 1, release the full-length expansion board retainer,
5.
and then remove the primary PCIe riser cage.
If a full-length expansion board is installed in slot 4, release the full-length expansion board retainer,
6.
and then remove the secondary PCIe riser cage.
Remove the full-length expansion board.
7.
To install the component, reverse the removal procedure.

Remove the primary PCIe riser cage

CAUTION:
remove all AC power cords before removing or installing the PCIe riser cage.
Power down the server (on page 23).
1.
Remove all power:
2.
To prevent damage to the server or expansion boards, power down the server and
Operations 29