Table of Contents
Advertisement
During the initial boot:
3.
To modify the server configuration ROM default settings, press F9 when prompted from the start up
o
sequence to enter the RBSU. By default, RBSU runs in the English language.
If you do not need to modify the server configuration and are ready to install the system software,
o
press F10 to access Intelligent Provisioning.
NOTE:
controller defaults to a RAID configuration based on the size and number of hard drives installed.
For more information on modifying the controller default settings, see the documentation on the
Documentation CD.
For more information on automatic configuration, see the HP ROM-Based Setup Utility User Guide on the
Documentation CD or the iLO Management Engine Information Library
(http://www.hp.com/go/ilomgmtengine/docs).
Registering the server
To register the server, see the HP Registration website (http://register.hp.com).
If an HP Smart Array controller has been added or is embedded in the system, the
Setup 43
Advertisement
Table of Contents
