Secure The Primary Pcie Riser Cage Full-Length Expansion Board Retainer - HP ProLiant DL385p Gen8 User Manual

Install the PCIe riser cage.
5.
Install the access panel (on page 25).
6.
Install the server into the rack
7.
Connect each power cord to the server.
8.
Connect each power cord to the power source.
9.
Power up the server (on page 23).
10.
Secure the primary PCIe riser cage full-length
expansion board retainer
Power down the server (on page 23).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Extend the server from the rack (on page 23).
3.
Remove the access panel (on page 25).
4.
Install a full-length expansion board
5.
Install the primary PCIe riser cage (on page 31).
6.
("Installing the server into the
("Installing a full-length expansion
rack" on page 40).
board" on page 73).
Operations 32