Flexiblelom Adapter Option - HP Apollo 4200 Gen9 User Manual

Remove the riser slot cover.
b.
Verify that any switches or jumpers on the expansion board are set properly. For more
c.
information, see the documentation that ships with the option.
Install the expansion board. Verify that the board is firmly seated in the slot.
d.
Install the PCI riser cage (on page 36).
e.
If the installed expansion board requires internal cabling to connectors covered by the air baffle,
7.
remove the air baffle (on page 30).
Connect all necessary internal cabling to the expansion board. For more information on these
8.
cabling requirements, see the documentation that ships with the option.
If removed, install the air baffle (on page 32).
9.
Install the access panel (on page 30).
10.
Install the server into the rack (on page 45).
11.
Connect all necessary external cabling to the expansion board. For more information on these
12.
cabling requirements, see the documentation that ships with the option.
Power up the server (on page 19).
13.

FlexibleLOM adapter option

For more information about product features, specifications, options, configurations, and compatibility,
see the product QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).
CAUTION: To prevent damage to electrical components, properly ground the server before
beginning any installation procedure. Improper grounding can cause ESD.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server
unless all expansion slots have either an expansion slot cover or an expansion board installed.
Hardware options installation 120