Install an expansion board into the PCI riser cage, if needed.
7.
Connect any internal or external cables.
8.
Install the optional secondary PCIe riser cage.
9.
If not already installed, install the secondary processor
10.
Install the access panel (on page 25).
11.
Install the server into the rack
12.
Connect each power cord to the server.
13.
Connect each power cord to the power source.
14.
Power up the server (on page 23).
15.
Hard drive cage option
An additional SAS controller option is required to support the hard drive cage option.
("Installing the server into the
("Processor
option" on page 44).
rack" on page 40).
Hardware options installation 76