Table of Contents
Advertisement
Disconnect the SATA cable from the optical drive and the SATA connector on the system board. The
10.
optical bay is disabled with the chipset SATA cable option.
Connect the chipset SATA cable:
11.
Connect the chipset SATA cable connector to the chipset SATA controller port on the system board.
a.
The chipset SATA connector on the SATA cable is narrower than the chipset SATA controller port
header on the system board.
Connect the remaining chipset SATA cable connector to the SATA header on the hard drive cage.
b.
Coil the cables behind the hard drive backplane to minimize airflow impact.
12.
Install the fan cage
13.
Install the air baffle
14.
Install the PCIe riser cage
15.
Do one of the following:
16.
Secure the primary PCIe riser cage full-length expansion board retainer (on page 32).
o
("Remove the fan
cage" on page 26).
("Remove the air
baffle" on page 34).
("Install the primary PCIe riser
cage" on page 31), if removed.
Cabling 96
Advertisement
Table of Contents
