Before You Begin - Follett 25 Installation, Operation And Service Manual

Welcome to Follett
Follett equipment enjoys a well-deserved reputation for excellent performance, long-term reliability and outstanding
after-the-sale support. To ensure that this equipment delivers that same degree of service, we ask that you review the
installation portion of this manual before beginning to install the unit. Our instructions are designed to help you achieve
a trouble-free installation. Should you have any questions or require technical help at any time, please call our technical
service group toll free at (877) 612-5086 or +1 (610) 252-7301.
Note: To expedite assistance, all correspondence or communication MUST include the model number, serial number and
complete and detailed explanation of the problem

Before you begin

After uncrating and removing all packing material, inspect the equipment for concealed shipping damage.
If damage is found, notify your shipper immediately and contact Follett Corporation for help in fi ling a claim,
if necessary.
Check your paperwork to determine which model you have. Follett model numbers are designed to provide information
about the type and capacity of Follett equipment. Following is an explanation of model numbers.
E50CT400A-L
!
Important cautions
• Do NOT tilt any unit farther than 30° off vertical plane during uncrating or installation
• Dispenser bin area contains mechanical, moving parts. Keep hands and arms clear of this area at all
times. If access to this area is required, power to unit must be disconnected fi rst.
• Follett recommends installation of a Follett FL4S water fi lter system (part# 00130229) in ice machine inlet
water line
• Prior to operation clean and sanitize the dispenser in accordance with instructions found in this manual
• Ice is slippery. Be sure counters and fl oors around dispenser are clean, dry and free of ice.
• Ice is food. Follow recommended cleaning instructions to maintain cleanliness of delivered ice.
• Keep ventilation openings in the appliance enclosure or in the built-in structure clear of obstructions
• Do NOT use mechanical devices or other means to accelerate the defrosting process
• To avoid a hazard due to instability of the appliance it must be fi xed according to instructions
• The appliance must be positioned so the plug is accessible
• If the cord is damaged it must be replaced by a special service agent
4
L = Lever dispensing, S = SensorSAFE infrared dispensing
Condenser type – A = air-cooled, W = water-cooled
Ice machine capacity and refrigerant – 400 = 181 kg (400lbs)/day, R404A refrigerant
Ice machine location – R = RIDE ice machine, T = integral ice machine in top of
cabinet, B = ice machine in base of freestanding units
Dispenser confi guration – C = countertop, H = wall mount, F = freestanding
Approximate storage capacity in lbs
Alternate voltage – C = 220 V 60 Hz
– E = 230 V 50Hz
25/50 Series 220 V 60 Hz/230 V 50 Hz Dispensers