Service Information; Wiring Diagram - Models With Lever Dispensing - Follett 25 Installation, Operation And Service Manual

Service information

Wiring diagrams
How unit works — lever models
The dispense wheel motor is energized through the power and ice dispense switches. The water solenoid valve is
energized through the power and water dispense switches. The ice machine receives the bin signal through the normally
closed bin thermostat and the bin signal switch.
the bin signal terminals on the ice machine circuit board.
opening the circuit to the bin signal terminals on the ice machine circuit board.
GREEN
25/50 Series 220 V 60 Hz/230 V 50 Hz Dispensers
When the bin level thermostat is calling for ice, a 16V circuit is completed to
When ice builds up around the bin thermostat, the contacts open,
4x4 JUNCTION BOX
ICE MACHINE
POWER
(230 V)
MAIN
POWER
SWITCH
PURPLE PURPLE
BLUE BLUE
BIN SIGNAL FROM ICE MACHINE
RED -
FREESTANDING AND REMOTE
BLACK -
TOP MOUNT
THERMOSTAT
Green/Yellow Ground
Brown 220V 60Hz/230V 50Hz
Blue
WHITE
WHITE
WHITE
M
WHITE
WTR
ORANGE -
FREESTANDING AND REMOTE
WHITE -
TOP MOUNT
BIN SIGNAL
SWITCH
19