Welcome To Follett; Before You Begin - Follett 25CI425A/W Installation, Operation And Service Manual

Welcome to Follett

Follett equipment enjoys a well-deserved reputation for excellent performance, long-term reliability and outstanding
after-the-sale support . To ensure that this equipment delivers that same degree of service, we ask that you take
a moment to review the installation portion of this manual before beginning to install the unit . Our installation
instructions are designed to help you achieve a trouble-free installation . Should you have any questions or require
technical help at any point, please call our technical service group at (877) 612-5086 or
(610) 252-7301 .
Note: To expedite assistance, all correspondence or communication MUST include the model number, serial
number and complete and detailed explanation of the problem .

Before you begin

After uncrating and removing all packing material, inspect the equipment for concealed shipping damage . If damage
is found, notify the shipper immediately and contact Follett Corporation so that we can help in the filing
of a claim, if necessary .
Check your paperwork to determine which model you have . Follett model numbers are designed to provide
information about the type and capacity of Follett ice dispensing equipment . Following is an explanation of the
different model numbers .
25CI425A-LI
§ Do not tilt any unit further than 30° off vertical during uncrating or installation .
§ Dispenser bin area contains mechanical, moving parts . Keep hands and arms clear of this area at all times . If
access to this area is required, power to unit must be disconnected first .
§ Follett recommends a Follett water filter system be installed in the ice machine inlet water line (standard capacity
#00130229, high capacity #00978957, carbonless high capacity #01050442) .
§ Prior to operation clean and sanitize the dispenser in accordance with instructions found in this manual .
§ Ice is slippery . Be sure counters and floors around dispenser are clean, dry and free of ice .
§ Do not block right side air intake or top air exhaust .
25CI425A/W, 25HI425A, 50CI425A/W, 50HI425A
I = ice-only; no water
Dispense actuation, L = lever, S = SensorSAFE
Condenser type, A = air-cooled, water-cooled
Ice machine capacity in lbs per day
Ice machine location, I = integral
Dispenser configuration, C = countertop, H = wall mount
Approximate storage capacity in lbs
CAUTION!
3