Download Print this page
Follett 50CI425A-L Cleaning Manual
Follett 50CI425A-L Cleaning Manual

Follett 50CI425A-L Cleaning Manual

Ice and water dispenser cleaning
Hide thumbs Also See for 50CI425A-L:

Advertisement

Quick Links

Follett Ice and water dispenser cleaning - from manual part #208595
Cleaning/descaling and sanitizing
Periodic cleaning/descaling and sanitizing of Follett's ice and water dispenser and ice machine system
is required to ensure peak performance and delivery of clean, sanitary ice. The recommended cleaning
procedures that follow should be performed at least as frequently as recommended and more often if
environmental conditions dictate.
Cleaning of the condenser can usually be performed by facility personnel. Cleaning/descaling and sanitizing of
the ice machine system should be performed by your facility's trained maintenance staff or a Follett authorized
service agent. Regardless of who performs the cleaning, it is the operator's responsibility to see that this
cleaning is performed according to the schedule below. Service problems resulting from lack of preventive
maintenance will not be covered under the Follett warranty.
Recommended cleaning/descaling and sanitizing intervals*
Symphony
Drain Line
Drain Pan/Drip Pan
Exterior
Condenser
Dispenser and Components
Ice Machine
Transport Tube
Ice Storage Area/Bin
* Ice machine and dispenser must be cleaned and sanitized prior to start-up.
Weekly
§ Do not use solvents, abrasive cleaners, metal scrapers or sharp objects to clean any part of the dispenser.
Dispenser drain pan and drain line
1. Pour 1 gal. (3.8 L) of hot tap water into drain pan to flush drains.
Splash panel front, SensorSAFE infrared dispensing
1. Deactivate dispensing by pressing and releasing clean switch located on left side of unit under top front
cover.
2. Clean lens and splash panel front using a soft cloth and mild, non-abrasive, non-chlorine based
cleaner.
3. Reactivate dispensing by pressing and releasing clean switch again.
Monthly
§ Do not use solvents, abrasive cleaners, metal scrapers or sharp objects to clean any part of the dispenser.
Condenser (air-cooled ice machine only)
1. Use a vacuum cleaner or stiff brush to carefully clean condenser coils of lint and debris to ensure
optimal performance.
CAUTION!
CAUTION!
801 Church Lane • Easton, PA 18040, USA
Toll free (877) 612-5086 • +1 (610) 252-7301
www.follettice.com
Frequency
weekly
weekly
as needed
monthly (air-cooled only)
semi-annually
semi-annually
semi-annually
semi-annually
© Follett Corporation
Form #2840
2/13

Advertisement

loading

Summary of Contents for Follett 50CI425A-L

  • Page 1 Cleaning of the condenser can usually be performed by facility personnel. Cleaning/descaling and sanitizing of the ice machine system should be performed by your facility’s trained maintenance staff or a Follett authorized service agent. Regardless of who performs the cleaning, it is the operator’s responsibility to see that this cleaning is performed according to the schedule below.
  • Page 2 § Do not use solvents, abrasive cleaners, metal scrapers or sharp objects to clean any part of the dispenser. Solution A: Following manufacturer’s instructions, mix cleaning solution of 1 gal. (3.8L) 120 F (49 C) water and 7 oz. (198g) (one 7 oz. packet) of Follett SafeCLEAN™ ice machine cleaner/descaler (P/N 00132001).
  • Page 3 37. Turn ice machine ON and begin to make ice (ice machine should start immediately with power and bin signal supplied). 38. After approximately 30 minutes, test dispenser for proper dispensing. 801 Church Lane • Easton, PA 18040, USA © Follett Corporation Toll free (877) 612-5086 • +1 (610) 252-7301 Form #2840 www.follettice.com...

This manual is also suitable for:

110fb425a-l12c1425a-l110ct425a-l25ci425a-l