Dismounting The Fs-100 (Windows) - Focus DVCPRO/DV User Manual

Using the FS-100 with a Computer

Dismounting the FS-100 (Windows)

When finished working with the FS-100 and the computer, it is
necessary to dismount FS-100 from the system
To do dismount the FS-100:
1. Click the
of the Windows task bar as shown below.
Unplug or Eject Hardware Icon
(Safely Remove Hardware)
2. Next, the computer system prompts to remove the connected
FS-100. This begins the dismount process.
3. Select the message and click on it.
The computer dismounts the FS-100 and then displays a
message that it is now safe to remove the unit.
FS-100 Portable DTE Recorder
108
Dismount FS-100 Before Powering Off
It is important to dismount the FS-100 from the Windows system
BEFORE powering down the unit.
Safely Remove Hardware
icon at the bottom right side