Table of Contents
Advertisement
Quickstart
Record and Playback with the FS-100
FS-100 Automatically Detects Input Stream from AG-HVX200
FS-100 automatically detects the stream type input from the AG-HVX200
camcorder and, in addition, selects the appropriate HDD MODE and DV
FORMAT menu options.
Test Recording
The settings of cameras, NLEs, and the FS-100 are numerous and many
are critical. It is recommended that a test recording be done when a setting
change is made. This test recording should be played back to the camera
and tested with the target NLE.
Before using the FS-100, set up the unit as outlined in the following
sections:
Power On the FS-100
Select HDD Recorder Mode
Select a DV File Format
Set Time and Date
Record With the FS-100
Manual Recording
Syncro Slave
Tapeless
Playback on the FS-100
The values set in these procedures are fixed and persist through
power cycles. To change them, repeat the steps outlined above.
FS-100 Portable DTE Recorder
26
27
28
29
30
32
34
35
36
40
Advertisement
Table of Contents
