Record And Playback With The Dr-Hd100; Power On The Dr-Hd100; Before Using The Dr-Hd100, Set Up The Unit As Outlined In The Following Sections: Power On The Dr-Hd100 - Focus ProHD DR-HD100 User Manual

Quickstart

Record and Playback with the DR-HD100

Before using the DR-HD100, set up the unit as outlined in the
following sections:
Power On the DR-HD100 .................................................... 22
Select HDD Recorder Mode ................................................ 23
Select a DV/HD File Format ................................................ 24
Set Time and Date .............................................................. 25
Record With the DR-HD100 ................................................ 27
Manual Recording ............................................................... 29
JVC GY-HD ......................................................................... 30
Series Record and Split Slave Control Modes .................... 31
Syncro Slave ....................................................................... 32
External ............................................................................... 33
Playback on the DR-HD100 ................................................ 34
The values set in these procedures are fixed and persist through
power cycles. To change them, repeat the steps outlined above.

Power On the DR-HD100

Step 1: Press the
it.
Power ON
(Reset)
Transport
Buttons
OFF (STOP)
To power OFF,
hold down for 3-5 seconds.
22
button for more than one second and release
Power ON
Play
ProHD DR-HD100 Portable DTE Recorder
Navigation
Buttons