Beward N13201 Operation User's Manual page 73

Name: enter the server name.
Server Type: select a server type: FTP, SMTP, HTTP, Network Storage. In this case the
SMTP type is selected.
Mail Server: enter an IP address or a SMTP server domain name (up to 64 symbols).
Server Port: enter a port of the SMTP server (the default value is 25) from 1 to 65535.
SSL: select it if your provider demands SSL-protocol usage.
Authentication: select a type of the authorization which is needed to send the letters to e-
mail:
Off: no authorization needed.
On: authorization is necessary. Select between [SMTP] or [POP before SMTP] depending
on your provider demands.
POP server name: this item displays when selecting [POP before SMTP]. In this case use
a POP server name (up to 64 symbols) for authorization.
User name: enter the user name to get an access to the e-mail server.
Password: enter a password (up to 64 symbols).
Re-type password: enter the password again to avoid a mistake.
Send mail from: enter the sender name (up to 64 symbols).
N13201 Operations User Manual
Chapter 11. The [SETTING] Menu: Event
Pic. 11.8
72